SOLYS 2 from Kipp & Zonen is used around the world in solar energy applications. It has Baseline Surface Radiation Network (BSRN) levels of performance and reliability. Installation and operation of the SOLYS 2 is much easier than any other sun tracker on the market.
With the optional top mounting plate and shading assembly SOLYS 2 can be configured as a complete solar monitoring station with up to three ventilated Kipp & Zonen radiometers. A large range of mounting kits is available for direct solar radiation instruments.
An advance over conventional sun trackers is the integrated GPS receiver to automatically configure location and time data upon installation. SOLYS 2 does not require a computer and software for setup. Leveling is easily checked using the integrated bubble level on top.
The rugged and distinctive cast aluminum housing has an integrated tripod stand with leveling feet, tie-down bolts and azimuth adjustment. A side plate with zenith adjustment and mountings for a Kipp & Zonen CHP 1 pyrheliometer is included.
SOLYS 2 does not suffer from internal clock drift because the time is regularly updated by the GPS receiver. If the tracker is correctly leveled and aligned it will continue to point accurately. An optional sun sensor is available for active tracking.
SOLYS 2 can operate from AC or 24 VDC power, both inputs are available as standard. The operating temperature range from - 20 °C to + 50 °C can be extended to -40 °C on AC power using the standard internal heater.
SOLYS 2 brings to the sun tracker market distinctive design, innovative features, performance, quality and unprecedented ease of use – all at a surprisingly affordable price.
The design of the SOLYS 2 sun tracker is based on open source software.
To download the latest version of the SOLYS 2 firmware, please click here.
< 0.1° passive tracking / < 0.02° active tracking (with optional sun sensor)
18 to 30 VDC and 90 to 264 VAC (50/60Hz)
Operating temperature range, DC
-20 to + 50 °C
Operating temperature range, AC
-40 to +50 °C
50x34x38 cm / 23 kg ( tracker) 5kg (tripod)
Ethernet / Web interface
Inverted tooth belts
21 W (reduces to 13 W at night) 100 W extra when heater is operating (AC only)